Round hay Baler Fasteners

Round hay baler lacing systems include:

. Hammer System U20
. Hammer System H20

Hammer System U20

Fastener for Industry and Agriculture

The MATO Hammer System U20 is designed for use in belts in the thickness range of 4-7mm. The system is particularly suitable for operation on small pulleys and offers extremely long service life. The main applications are:

.  Agriculture.
.  Specially for splicing round hay baler belts.
.  Industry.

Belt strength in kN/m	up to 450	up to 450	up to 450
Belt thickness in mm	4-5	5-6	6-7
Fasteners:
Series	U24AS	U24BS	U24CS
Connecting pins:
Zinc plated cable	K1	K2	K2
Armoured cable	O1K	O2K	O2K
Diameter in mm	3.0	3.3	3.3

Hammer System H20

Fastener for Industry and Agriculture

The MATO Hammer System H20 is designed for use in belts in the thickness range of 5-7mm. The system is particularly suitable for operation on small pulleys and offers extremely long service life. The main applications are:

.  Agriculture.
.  Specially for splicing round hay baler belts.
.  Industry.

Belt strength in kN/m	up to 450
Belt thickness in mm	5-6
Fasteners:
Series	H24BS
Connecting pins:
Zinc plated cable	K2
Armoured cable	O2K
Diameter in mm	3.3

Baler Belt Lacing Tools U20 Tools
	Profi 19 Vice Lacer . Made from high quality hardened tool steel. . Designed to suit the volumes of belt lacing carried out by dealers. . A splice width up to 210mm (19 fasteners) can be installed in one step. . Installation can either be performed with a hammer and manual punch or with the U20 air hammer and punch. . Wider belts are spliced by progressive step by step installation.

Baler Belt Lacing Tools H20 Tools
	Profi Tool 14" ( 350mm ) . Designed for volume users such as dealers. . Made from high quality hardened tool steel. . A splice width of up to 14" ( 350mm ). . Installation can be spliced by progressive step by step installation.
	Eco Tool 7" ( 180mm ) . Made from high quality hardened tool steel. . A splice width of up to 7" ( 180mm ). . Installation can either be performed with a hammer or air hammer. . Belts can be spliced at the baler. . A user friendly tool for the farmer to use.

for U20 & H20 Baler Belt Splicing
	Air Hammer . The air hammer and punch is an alternative to the manual punch, making splice installation quick and easy. Recommended for dealer applications.
	Baler Belt Cutter . A safe and highly versatile piece of equipment for cutting belts up to 12" wide and 1/2" thick, inc many built in features. . A squaring arm to ensure an accurate square cut belt. . A clamp to retain the belt while cutting or skiving. The clamp also encloses the blade for safety. . A guide way to facilitate skiving the belt when using J.D Skiver 18. . A spare blade housed in the cutter. . Portable and easy to use, you can cut your belt on the ground, on a bench or the tail gate of your truck.
	Skiver For Diamond Top Baler Belt . A necessary tool which ensures a correctly skived belt prior to installation of the belt splice. . The skiver removes the top pattern cover of the belt in one pass leaving the correct rebate and finished belt thickness. . The skiver blade is two sided to give double blade life.
	Belt Chamfer Tool . Easy to use. . Blade safety lock. . Instructions on anvil. . Belt positioning dowels. . Left & right hand cut. . Replaceable utility blade.
	Belt Cutting Guide & Squaring Template . Easy to use steel template to cut belt end square. . Safety slot for guiding belt knife. . Squaring edge to retain belt.

Conveyor Belt fasteners

Round Hay Baler Lacing Systems

PRODUCTS

COMPANY