Conveyor Belt fasteners

Round Hay Baler Lacing Systems

Round hay baler lacing systems include:

.  Hammer System U20
.  Hammer System H20

  Hammer System U20
  Fastener for Industry and Agriculture
Hammer System U20 The MATO Hammer System U20 is designed for use  in belts in the thickness range of 4-7mm. The system  is  particularly suitable for operation on small pulleys and offers extremely long service life. The main applications are: 

 
Connecting pins for this product
Skiver for this product

  .  Agriculture.
  .  Specially for splicing round hay baler belts.
  .  Industry.

 Belt strength in kN/m
up to 450
up to 450
up to 450
 Belt thickness in mm
4-5
5-6
6-7
 Fasteners:
 
 
 
 Series
U24AS
U24BS
U24CS
 Connecting pins:
 
 
 
 Zinc plated cable
K1
K2
K2
 Armoured cable
O1K
O2K
O2K
 Diameter in mm
3.0
3.3
3.3
 Hammer System H20
 Fastener for Industry and Agriculture
Hammer System U20  The MATO Hammer System H20 is designed for use in belts in the   thickness range of 5-7mm. The system is particularly suitable for   operation on small pulleys and offers extremely long service life. The   main applications are: 

 
 
 

  .  Agriculture. 
  .  Specially for splicing round hay baler belts.
  .  Industry.

 Belt strength in kN/m
up to 450
 Belt thickness in mm
5-6
 Fasteners:
 
 Series
H24BS
 Connecting pins:
 
 Zinc plated cable
K2
 Armoured cable
O2K
 Diameter in mm
3.3
 Baler Belt Lacing Tools
 U20 Tools
 Profi 19 Vice Lacer
 .  Made from high quality hardened tool steel.
 .  Designed to suit the volumes of belt lacing carried out by dealers.
 .  A splice width up to 210mm (19 fasteners) can be installed in one
   step.
 .  Installation can either be performed with a hammer and manual 
   punch or with the U20 air hammer and punch.
 .  Wider belts are spliced by progressive step by step installation.
 Baler Belt Lacing Tools
 H20 Tools
 Profi Tool 14" ( 350mm )
 .  Designed for volume users such as dealers.
 .  Made from high quality hardened tool steel.
 .  A splice width of up to 14" ( 350mm ).
 .  Installation can be spliced by progressive step by step   installation.
 Eco Tool 7" ( 180mm )
 .  Made from high quality hardened tool steel.
 .  A splice width of up to 7" ( 180mm ).
 .  Installation can either be performed with a hammer or   air hammer.
 .  Belts can be spliced at the baler.
 .  A user friendly tool for the farmer to use.
 
 for U20 & H20 Baler Belt Splicing
 Air Hammer
 .  The air hammer and punch is an alternative to the manual punch,
 making splice installation quick and easy. Recommended for
 dealer applications.
 Baler Belt Cutter
 .  A safe and highly versatile piece of equipment for cutting belts up to
 12" wide and 1/2" thick, inc many built in features.
 .  A squaring arm to ensure an accurate square cut belt.
 .  A clamp to retain the belt while cutting or skiving. The clamp also
 encloses the blade for safety.
 .  A guide way to facilitate skiving the belt when using J.D Skiver 18.
 .  A spare blade housed in the cutter.
 .  Portable and easy to use, you can cut your belt on the ground, on a
 bench or the tail gate of your truck.
 Skiver For Diamond Top Baler Belt
 .  A necessary tool which ensures a correctly skived belt prior to
 installation of the belt splice.
 .  The skiver removes the top pattern cover of the belt in one pass
 leaving the correct rebate and finished belt thickness.
 .  The skiver blade is two sided to give double blade life.
 Belt Chamfer Tool
 .  Easy to use.
 .  Blade safety lock.
 .  Instructions on anvil.
 .  Belt positioning dowels.
 .  Left & right hand cut.
 .  Replaceable utility blade.
 Belt Cutting Guide & Squaring Template
 .  Easy to use steel template to cut belt end square.
 .  Safety slot for guiding belt knife.
 .  Squaring edge to retain belt.